Vibration,
Shock, Bump and Seismic Testing
The vibration test gear is used to check that the product
under test is unaffected by mechanical induced vibration shocks. The product
under test are fixed on a shaker platform.
Technical Specification
Apparatus: Derritron VP30
Maximum mass of test specimen: 2.25kg and approximate
maximum size limit of 0.3m
Typical Test Standards: IEC60068-2-6, IEC60068-2-27, IEC60068-2-29,
IEC60068-3-3.
(All measurement equipment has NAMAS traceable calibration).
Vibration Test Gear
The platform motion is programmed by a precision controller/amplifier
driven by windows based software. This enables most types of frequency
sweeps and shock-type waveforms to be generated at the required acceleration
and displacement levels.
A wiring umbilical loom allows the product under
test to be powered up and monitored if required. The shaker platform can
be rotated through 90° to allow horizontal testing.
|
You are here:
PBSI
Home /
P&B Technical Services
